NOTE:

THE MK2 DESIGN HAS BEEN UPDATED SEPTEMBER 2017 TO THE MK3. THE PRINCIPLES OF THE FCD UNIT ARE THE SAME, BUT THE MK3 NOW USES A SWEEPING FM RADIO WITH THE 5th ELEMENT, IN ORDER TO COMMUNICATE THROUGH RADIO WAVES TRAVERSING THE ETHER. (I have left the Mk2 information below for historical reference).

 

ABOVE: The Mk3 FCD unit, September 2017.

The Fylfot Communications Device (Mk2)

The FCD is a new kind of communications device that is used to attempt making contact with Beings that are not of this physical Earth dimension. It is tuned to the Etheric Energy Fields, which seems to be the best frequency to make this contact. The FCD turns radio wave signals into audible recognised voice and sound patterns which have to be then amplified.

What does it actually do?


  • The Essential Design
  • Parts List and construction
  • How to use the FCD
  • Connecting to the PC

The Essential design

The main concept of the FCD is to connect with intelligences within the Etheric energy fields that exist all over the Universe. To do this the unit amplifies radio signals through a specific pattern that closely resembles the swastika stone symbol. Broadcast radio waves in the AM band have several sources; man-made "intentional" waves, Earth's magnetic field and Cosmic - stellar radio waves, including those from the closest star, the sun. Magnetism and electricity are the co-related forces, hence the measurable and detectable field which they generate is called the Electro-Magnetic Spectrum.  An orgone and quartz crystal accumulator within the device enables this signal to connect the user with any other entities wishing to communicate through it.  The design includes an 'essence' of the 5th Elelment -the Ether- which is imbued upon each unit by Nigel Mortimer's channeled energy. This process makes the FCD very different from other crystal radio sets, ghost boxes, etc., that are currently on the market. In principle, none of those devices are the same as the FCD, although they do use some of the same electrical components.  

The FCD unit is built within a very nice wooden box measuring  approx 8cms square /cubed. The case has all access points, control knobs and connectors built into it and the unique wire wrapped crystal radio antenna (x 2) can be removed from the unit when not in use. The unit does not use any external electrical power source and derives this from the wireless energy of the atmosphere at a very low voltage that is completely safe to handle. The FCD is a small unit that is versatile enough to be carried with you at all times.

LEFT: The diagram shows how you are able to access information that is held within the Ether. All energy lifeforms are able to do this at the subconscious level, including humans and Beings from other worlds. The FCD assists you with this process.

Parts List and construction MK2v1

  • 1 x 8cm x 8cm cubed wooden case with opening top.
  • 2 x Banana Plugs (red/black)
  • 2 x Banana Sockets (red/black)
  • 1 x Miniature Variable Tuning Capacitor & Control Knob
  • 2 x  3.5mm MONO Jack Sockets
  • 1 x  680uh Feritte Bar Antenna Loopstick & Coil
  • 1 x .001uf Ceramic Disc Capacitor
  • 1 x 47K ohms Resistor
  • 1 x  1N34A Germanium Crystal Diode
  • 5 x  Quartz Crystal Chips
  • 1 x  Orgonite Base
  • 2 x  Copper wire wrapped Crystal Points Antenna
  • 1 x Lengths of connecting wires, screws, etc.
  • 1 x Essential ETHER essence

 

NOTE: This version has now been updated.

how to use the fcd

I always wanted the FCD to be easy to use, so that as many people as possible would be able to benefit from it. There are many devices on the market (mainly used for ghost hunting) that either do not work properly or are too difficult to set up. With the FCD, there are essentially only a couple of controls involved in making it work for you. In order to get the best results and the clearest communications, the device has to be tuned in to both the etheric fields and your own body energy field. You start to do this as soon as you touch the unit and focus in on the swastika design on the lid of the case.  You do not need to plug the unit in to any power supply. It's works without one! It takes all the power it needs from the surrounding atmosphere (just as Tesla had intended) and by turning the knob connected to the variable capacitor inside the box, you tune this until you start to receive an audible signal.  

connecting to the pc

Without an amplifier  this signal will still be very difficult to hear, so I suggest that you use the 3.5mm audio out and cable included with the unit, to connect to a PC or guitar amplifier. Using a PC and software (available on the CD included with the FCD) you will be able to filter out noises and make your communications even clearer with the ability to record them. It is intended that the Mk2 model will also include a 3,5mm microphone socket (INPUT), so that you will be able to interact with the communications in an audible manner.


Here we have a copy of the first audio wave recorded in Audacity through the FCD. The signal needs a lot of amplifying in the software, but there are voices and strange noises coming through which sound very 'other worldly'.